Products / Specialty Inorganic Materials
ONLINE CATALOG
MSDS SEARCH
PROFILE
PRODUCTS
CUSTOM MANUFACTURING
TECHNICAL PUBLICATIONS
REQUEST INFORMATION
WHAT'S NEW
INTERNATIONAL SALES
SITE SEARCH

Specialty Inorganic Materials for 
Phosphor Applications

CERAC continues to develop and improve materials used in the manufacture of tomorrow's phosphor formulations. These Specialty Inorganic Materials provide the material solution in reaching new levels of luminous output in LED products. Put our 40 years of manufacturing experience to work for you in your Phosphor development project.

Click Here for Product Data Sheet in PDF Format

Sputtering Targets

Evaporation Materials

New Pre-melted Oxide Evaporants

 
Materials   Typical Purity   Particle Size
Calcium Nitride    

 Ca3N2

99%

 -200 mesh
Calcium Fluoride     

CaF2

99.95%

 -325 mesh
Calcium Sulfide     

CaS

 99.99% -325 mesh
Barium Metal    

Ba

 99.7%          25 mm 
Barium Carbonate           

BaCo3 

 99.9% -325 mesh
Barium Carbonate     

BaCo3

 99.999% -80 mesh
Barium Fluoride     

BaF2

 99% -325 mesh
Barium Hydride     

BaH2

 99.7% -60 mesh
Barium Nitride     

Ba3N2

 99.7% -20 mesh
Barium Sulfide     

BaS

 99.9% -200 mesh
Strontium Metal    

Sr

 99%  Random Size Pieces  
Strontium Carbonate     

SrCo3

 99.5% -100 mesh
Strontium Fluoride     

SrF2

 99.9% -200 mesh
Strontium Hydride     

SrH2

 99.5% -60 mesh
Strontium Nitride     

Sr3N2

 99.5% -60 mesh
Strontium Sulfide    

SrS

 99.9% -200 mesh

Visit the CERAC on-line catalog for product and ordering information.

Materials Development

CERAC is more than a materials supplier. CERAC employs a diverse group of material technologists who will work with you, identifying the proper material characterizations and configurations for your application and manufacturing environment. As a subsidiary of Williams Advanced Materials (WAM), CERAC has the ability to leverage broad global manufacturing and R&D capabilities. We offer custom Specialty Inorganic Materials for a wide variety of applications including Energy, Electronics and Semiconductors; Medical; Abrasives, Friction and Refractory Coatings; Optics, Crystals and Catalysts. WAM understands the continual evolution of new material requirements and we pay close attention to the particular needs of each customer’s specific challenges.
 
All printed, graphic and pictorial materials made available on this website are owned by CERAC and protected by Federal Copyright laws. None of the materials, in whole or in part, may be reprinted and distributed or otherwise made available to others for any purpose without CERAC's prior written consent.

Phone:  414-289-9800 /  FAX: 414-289-9805  /   ceracinfo@beminc.com